Protect C with 2 battery extensions
Fig.: Protect C 1000 und Protect C 1000 BP
Check the correct fit of the UPS and the battery unit the casings e.g. have to
have the same dimension .
Now connect the corresponding battery connectors using the supplied battery
connection cables as shown in the figure above. When connecting, make sure that
you push the plug quickly and firmly in the battery connectors. Fix the connector
parts concluding with the screws on the side.
Change the menu item Settings under External Battery Modules to the number
see
.
.3 POWER SUPPLY
Check the compatibility of the UPS nominal input voltage with the rated voltage
applicable in your country. The UPS automatically adjusted output voltage depends
on the level of the applied nominal input voltage. Changes to 200 VAC, 208 VAC, 220
VAC, 230 VAC or 240 VAC can always be done manually via the control panel.
EN