Tandem t:slim x2 Training Manual page 83

8. Tap OK.
9. Tap START.
The STARTING FILL screen
3
is displayed.
Note: The minimum amount of insulin
⚑
required to fill tubing after a cartridge change
is 10 units.
10. Tap STOP once three drops of insulin
are seen at the end of the tubing.
The STOPPING FILL screen
3
is displayed, followed by the
DETECTING INSULIN screen.
11. Verify that drops are seen and
tap DONE.
For Professional Use Only
Make sure the set is disconnected
from your body and securely
connect the tubing to your
cartridge.
On the next screen you will fill
your tubing with insulin.
OK
Fill Tubing
Fill Tubing
Amount Filled
Fill Tubing
Fill Tubing
Amount Filled
If you see drops at the end of the
tubing, press DONE. If no insulin
drops are noticed, press FILL to
continue filling.
Amount Filled: 15.5 u
FILL
Load
START
0
u
STOP
15.5
u
DONE
81