Display Menus - ABB 827E Product Manual

SEL
Navigation
Moves to the Main menu (only from the System Status Screen)
•
Moves to menu of the selected item
•
Inverter Select
Moves to first Status item of the selected Inverter
•
Inverter Status Navigation
Moves to the previous Status item
•
Adjustment / Control
Moves to the Change ACCEPT / CANCEL screen
•
Executes selected ACCEPT / CANCEL choice
•

Display Menus

There are several menus available from the System Controller. See Figure 20 for a diagram of menu
structure.
System Status Screen (Main Screen): Upon initial start-up the system will perform an LED test and
will attempt to recognize the system components. During this period the FAIL lamps on the inverters
will flash. This will take a few minutes. The System Controller LCD will display the System Update
screen during this time.
SYSTEM UPDATE
IN PROGRESS
Once all the components are recognized, the System Status screen will appear as follows:
120 VAC
SYSTEM - GOOD
Note: Actual system voltage and current will be displayed.
Page 44
© Copyright 2021 ABB. All rights reserved.
X AAC
s
120 VAC X AAC
SYSTEM - ALARM s