Table of Contents
Advertisement
You must connect the power cable to the gateway first, and then connect a serial cable to open a
•
terminal.
In the ADTRAN IoT app, if anything besides bsaws is entered into the Server Address field on the LoRa
•
Config page, the active packet forwarding program will not be Basic Station connected to AWS.
The LoRa Radio Sub-Band page on the ADTRAN IoT app is not used for AWS.
•
11. OTA Updates
The following outlines the OTA update/upgrade procedure:
Connect to the gateway via the ADTRAN IoT app.
1.
Navigate to System Status page.
2.
Select Upgrade Device Firmware.
3.
NOTE: An upgrade requires internet access and takes approximately 3 to 5 minutes to complete.
Performing a firmware upgrade will move existing AWS certificates, device name, and retain the active
packet forwarder; however, you will lose any statically set network settings.
© 2020, Amazon Web Services, Inc. or its affiliates. All rights reserved.
Advertisement
Table of Contents
