Advertisement
Quick Links
Quick Start
f
WARNING!
Read all warnings, cautions, notes and installation instructions before installing or servicing this equipment.
f
AVERTISSMENT!
Lisez tous les avertissements et mises en garde avant l'installation de cet équipement ou la réalisation de toute opération de maintenance.
Overview
This quick start describes how to install, configure, and troubleshoot ADTRAN's 8-channel Enterprise LoRaWAN gateway, which provides Internet of
Things (IoT) connectivity using the LoRaWAN technology over the 902 to 928 MHz frequencies. This robust gateway can be managed using the iOS-
based ADTRAN IoT app over Bluetooth to provide connection to the LoRaWAN gateway.
■
"Installing the LoRaWAN Gateway"
■
"Supplying Power to the LoRaWAN Gateway"
■
"Connecting to the LoRaWAN Gateway"
■
"Understanding the Status LEDs"
■
"Restarting, Restoring Defaults, and Upgrading the LoRaWAN Gateway"
■
"Product Specifications"
on page 6
Antenna Mount
f
WARNING!
WARNING indicates a hazard which, if
not avoided, could result in death, injury
or serious property damage.
ADTRAN
7310-8 LoRaWAN Gateway
8-channel Enterprise LoRaWAN Gateway
on page 2
on page 3
on page 3
on page 5
LEDs
PoE/Net
Figure 1. LoRaWAN Gateway
f
CAUTION!
CAUTION indicates a hazard which, if not
avoided, could result in service interruption,
damage to the equipment, or minor property
damage.
on page 5
Aux PWR
g
NOTES inform the user of additional, but
important, information or features.
February 2021
617101318F1-13B
P/N: 17101318F1
NOTE
Advertisement
Related Manuals for ADTRAN 7310-8
Summary of Contents for ADTRAN 7310-8
- Page 1 Overview This quick start describes how to install, configure, and troubleshoot ADTRAN’s 8-channel Enterprise LoRaWAN gateway, which provides Internet of Things (IoT) connectivity using the LoRaWAN technology over the 902 to 928 MHz frequencies. This robust gateway can be managed using the iOS- based ADTRAN IoT app over Bluetooth to provide connection to the LoRaWAN gateway.
- Page 2 Prior to Installation Before installing the equipment, inspect the gateway. If damage has occurred during shipping, file a claim with the carrier, and then contact ADTRAN Customer Support. For more information, refer to the product warranty available online at https://adtran/wp_support_warranty.
- Page 3 To connect using the ADTRAN IoT app, follow these steps: 1. Download the ADTRAN IoT app onto your Apple device. The ADTRAN IoT app is available for download from Apple’s App Store. 2. Ensure that the Bluetooth feature of your Apple device is on.
- Page 4 3. Open the ADTRAN IoT app on your Apple device and select SCAN from the menu. The application will scan for any ADTRAN LoRaWAN gateways within the Bluetooth connection range, and provide you the option to connect to any discovered devices. Discovered devices will be displayed; the default name of any discovered device is set to the last 5 digits of the device’s serial number (for example, 00007, as shown in...
-
Page 5: Understanding The Status Leds
Step 4 on page 4, and then disconnect again. The new device name will be displayed in the Connected Device menu (note that it can sometimes take a few moments for the ADTRAN IoT app to reflect the name change). -
Page 6: Product Specifications
(by selecting Upgrade when prompted), the firmware upgrade process will automatically begin. Once the upgrade process has begun, you can close the ADTRAN IoT app session while the firmware upgrade process continues. The firmware upgrade process will take several minutes to take effect, and the gateway may reboot several times during the upgrade process. -
Page 7: Fcc Statements
Compliance ■ Changes or modifications not expressly approved by ADTRAN could void the user's authority to operate this equipment. ■ This product is NRTL Listed to the applicable UL/CSA Standards. ■ IEEE 802.3at PoE+ FCC Statements ■ This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: ■...