Table of Contents
Advertisement
3. Under Destination details, enter ProcessLoRa as the Destination name, and an appropriate description in
the Destination description – optional field.
NOTE: The Destination name can be anything. For getting started and consistency, choose
ProcessLoRa for the first integration with AWS IoT Core for LoRaWAN.
4. Once the destination role is specified, begin configuring the destination rule by entering LoRaWANRouting
in the Rule name field. Ignore the Rules configuration – Optional section for now. The destination rule
will be fully configured later, as described in the "Hello World" sample application (refer to
Destination Rule
5. Once you have specified the destination role and rule name, select Add Destination. The "Destination
added" message will display, indicating that the destination has been successfully added.
5.4.4 Registering the Endpoint Device
Once the endpoint device destination has been specified, you can begin the endpoint device registration process
with the AWS IoT Core for LoRaWAN by connecting to the
1. In the navigation pane, select Wireless connectivity, followed by Devices, and then finally select Add
wireless device.
2. In the Add device page, select the appropriate LoRaWAN specification version from the Wireless device
specification drop-down menu.
3. In the LoRaWAN specification and wireless device configuration menu, enter the DevEUI value in the
appropriate field, and again in the Confirm DevEUI field to confirm it.
4. Complete the remaining fields as per the OTAA/ABP choice for your device (as defined in
Preparation). Be sure to enter a name for your device in the Wireless device name – optional field.
5. Navigate to the Profiles section (under Wireless device profile), select the appropriate profile from the
drop-down menu, and select Next. The selected profile should correspond to your device and region.
NOTE: Compare your device details to the profile to ensure the device profile is correct. If there are no
valid default options, you will have to create a new profile (as detailed in
and Service
Profiles).
6. Next, select the previously created destination for the endpoint device (ProcessLoRa) from the Choose
destination drop-down menu and select Add device. A "Wireless device added" message will display,
indicating that your endpoint device has been successfully registered to the AWS IoT Core.
6. Configuring the ADTRAN 7310-8 LoRaWAN Gateway
The following sections detail the processes for installing the ADTRAN 7310-8 LoRaWAN gateway hardware and
software. Additional information for both processes is available online in the
6.1 ADTRAN 7310-8 Hardware Installation
The hardware installation process for the ADTRAN 7310-8 gateway includes the following:
•
Installing the Antenna
•
Mounting the 7310-8 LoRaWAN Gateway
•
Supplying Power to the 7310-8 LoRaWAN Gateway
•
Connecting to the LoRaWAN Gateway
•
Configuring the LoRaWAN Gateway
•
Understanding the 7310-8 Status LEDs
6.1.1 Installing the Antenna
To install the provided antenna onto the LoRaWAN gateway, attach the external antenna onto the antenna port on
the left side of the gateway as shown in the
6.1.2 Mounting the 7310-8 LoRaWAN Gateway
The 7310-8 LoRaWAN gateway can be mounted to a ceiling, wall, or dropped ceiling. To mount the gateway in one
of these configurations, follow the instructions provided in the
© 2020, Amazon Web Services, Inc. or its affiliates. All rights reserved.
in the
"Hello World"
configuration section).
ADTRAN 7310-8 Quick Start
AWS IoT console
and following these steps:
5.4.2 Verifying Endpoint Device
ADTRAN 7310-8 Quick Start
Guide.
ADTRAN 7310-8 Quick Start
Creating the
5.4.1
Guide.
Guide. When mounting
Advertisement
Table of Contents
