ADTRAN 7310-8 Getting Started Manual page 17

Lorawan gateway with aws iot core

Hide thumbs Also See for 7310-8:

Table of Contents

6.3 Additional Software References

Please browse the

ADTRAN Support Community

6.4 Configuring the ADTRAN 7310-8 Gateway for AWS

To configure the ADTRAN 7310-8 gateway for use with AWS, you will need to upload the CUPS certifications to the

gateway and then provision and start the gateway's packet forwarding program for communication with AWS. The

steps required to complete these configurations are provided in the following sections.

6.4.1 Uploading CUPS Certifications to the 7310-8 Gateway

The first step in provisioning the ADTRAN 7310-8 gateway for use with AWS is to upload the configured CUPS

certifications to the gateway. To upload the CUPS certificates, follow these steps:

1. Acquire the 7310-8 gateway IP address through either the ADTRAN IoT app or another process.

2. Enter the gateway IP address in a web browser, and be sure to specify port 5000 is used. Enter the IP

address and port in the following format: X.X.X.X:xxxx; for example, 10.0.0.248:5000.

3. Upload the 4 CUPS certificates created in

4. Enter the gateway's 5-digit PIN (last 5 digits of the device's serial number).

5. Select Submit to upload the certificates to the gateway.

6.4.2 Provisioning and Starting the Packet Forwarding Program

for available technical documentation.

Adding an IAM Role for CUPS

Server.

Table of Contents