Table of Contents
Advertisement
]
}
10. Select Update Trust Policy to apply the policy changes. Once the changes are applied, in the Trusted
Entities section you will see the following message: The identity provider(s) iotwireless.amazonaws.com.
Once the destination role has been created and configured to communicate with the AWS IoT Core for LoRaWAN,
the IAM role and policy configuration is complete. The next step in getting started with the AWS IoT Core is to
register the LoRaWAN device with the AWS IoT Core.
5.3 Registering the LoRaWAN Gateway with AWS IoT
Once the IAM roles and policies are configured for your AWS account, the next step in getting started with the
AWS IoT Core is to register the LoRaWAN gateway with the AWS IoT Core. To successfully register the gateway,
gather the required information for the gateway and complete the steps detailed in
Gateway
below.
5.3.1 Preparation
To complete the gateway registration process, you will need the following information available:
•
LoRaWAN region. For example, if the gateway is deployed in a US region, the gateway must support LoRaWAN
region US915.
•
Gateway LNS-protocols. Currently, the LoRa Basics Station 2.0.5 protocol is supported.
•
Gateway ID (GatewayEUI) or serial number. This is used to establish the connection between the LNS and the
gateway. Consult the documentation for your gateway to locate this value.
5.3.2 Registering the LoRaWAN Gateway
To register the LoRaWAN gateway with AWS IoT Core for LoRaWAN, connect to the
these steps:
1. Select Wireless Connectivity from the menu on the left.
2. In the Wireless Connectivity menu, select Intro and then select Get Started. This step is needed to pre-
populate the default profiles for the device.
3. In the Get Started menu, navigate to the Add LoRaWAN Gateways and Wireless Devices section and
select Add Gateway.
4. In the Add Gateway menu, enter the appropriate information in the GatewayEUI and Frequency Band
(RF Region) fields. The Gateway EUI value is the device's MAC address with FFEE inserted between the
third and fourth octets. For example, for a gateway with MAC address XX:XX:XX:XX, the EUI value would
be XX:XX:FF:EE:XX:XX .
NOTE: The ADTRAN 7310-8 gateway's MAC address can be found in the Ethernet Config menu within the
iOS ADTRAN IoT app. Specific instructions for accessing the app and locating this menu are detailed in
Configuring the LoRaWAN Gateway (Basic Configuration)
Configuration.
5. Next, enter a descriptive name in the Name – optional field (ADTRAN recommends that you use the
GatewayEUI as the name), and select Add Gateway.
Once the gateway has been successfully added, you will need to specify the certificate information for the
gateway. To specify the certificate and complete the registration process, follow these steps:
1. After selecting Add Gateway to add the gateway to the device list, from the Get Started menu, select
Configure Your Gateway to access the gateway configuration menu.
© 2020, Amazon Web Services, Inc. or its affiliates. All rights reserved.
"Sid": "",
"Effect": "Allow",
"Principal": {
"Service": "iotwireless.amazonaws.com"
},
"Action": "sts:AssumeRole",
"Condition": {}
}
Registering the LoRaWAN
AWS IoT console
and
ADTRAN 7310-8 Gateway Software
and follow
Advertisement
Table of Contents
