NEC Express5800/R120h-1M 3rd-Gen Use Precautions page 15

(2) Delete current Receiving Information from Express Report Service (MG) (Windows).
For details refer to 3.1.5 Setting for Receiving Information or 3.2.4 Setting for Receiving Information
in "Express Report Service (MG) Installation Guide (Windows)".
(3) Set Receiving Information downloaded in step (1) to Express Report Service (MG)
* Download "Express Report Service (MG) Installation Guide (Windows)" from the following website.
http://www.58support.nec.co.jp/global/download/index.html
- ESMPRO tab
- Express Report Service (MG) (Windows)
◆The steps of confirmation for iLO FW version
- Server Health Summary
Push the UID button on the server and check the version of the iLO firmware on the screen.
(For the detail, refer to Server Health Summary in iLO5 user guide.)
- Remote
Check the version of the iLO firmware on "Firmware & OS Software - Installed Firmware" by
iLO web interface.
◆The steps of confirmation version for NEC ESMPRO Manager
(1) Log in NEC ESMPRO Manager.
(2) Click the "About NEC ESMPRO Manager" link at the top right of the screen.
(3) Confirm "Setup Value" field on the screen.
◆The steps of confirmation version for iLO Receiving Information (ilo_en.mtb, iml_en.mtb))
Confirm the version of "iLO SNMP Trap" in "Setting for receiving information" screen.
Regarding "Setting for receiving information" screen, refer to 3.1.5 Setting for Receiving Information or
3.2.4 Setting for Receiving Information in "Express Report Service (MG) Installation Guide (Windows)".
● About EXPRESSBUILDER Help
If the EXPRESSBUILDER help is different from Maintenance Guide, do not use the help but the guide.
- 15 -