Download Print this page

NEC Express5800/R120h-1M 3rd-Gen Use Precautions page 13

Hide thumbs Also See for Express5800/R120h-1M 3rd-Gen:

Advertisement

● Caution about VMware ESXi
This caution is about the screen display of VMware vSphere : Monitor > Hardware > System Sensor >
Sensor when the ESXi is booted.
1. In case of non-redundant FAN configuration, there are cases where the screen display of following
sensor Health(vCenter:Status) shows "Warning(Yellow)" after ESXi completes boot, This
"Warning(Yellow)" does not indicate hardware malfunction and there is no impact to the system
operation.
- Cooling Unit 1 Fans
2. There are some cases where the screen display of following sensor Health(vCenter:Status) shows " ? "
after ESXi completes boot, this does not indicate hardware malfunction and there is no impact to the
system operation.
- System Chassis 1 UID
●About the internal DVD-ROM (N8151-137/138) display
When Embedded SATA Configuration setting (* 1) is set to [Smart Array SW RAID Support], two internal
DVD drive information is displayed in the Disk Utilities menu (* 2) depending on the operating environment.
Both can refer to the same internal DVD information.
(*1)「System Configuration > BIOS/Platform Configuration (RBSU) > Storage Options > SATA Controller
Options > Embedded SATA Configuration」
(*2)「System Configuration > HPE Smart Array S100i SR Gen10 > Disk Utilities」
- 13 -

Advertisement

loading

This manual is also suitable for:

Express5800/r120h-2m 3rd-gen