NEC Express5800/R120h-1M 3rd-Gen Use Precautions page 12

● Caution for the case where the setting "Require Host Authentication" is enabled from iLO web
interface(*).
(*) Set "Require Host Authentication" Enabled in "Security > Access setting > iLO"
When the setting described above is executed, the following symptoms are expected
・Many messages "Remote Insight/ Integrated Lights-Out Unauthorized Login Attempts" are displayed
in alert viewer.
・Error occurs, when Starter Pack( Standard Program package) is applied.
The following services and functions are not supported
・Report services for hardware faults in Express Report Service
・Report services in RAID Report Service
・Server diagnosis function in Server Diagnostic Karte
・Function to display Device information and configuration collected by iLO
・Function to collect event logs collected by iLO
● Caution for iLO firmware 2.10 or later
If you update to iLO5 firmware 2.10 or later, "Virtual NIC" device may be shown with warning on Windows
device manager. If you do not use iLO virtual NIC functionality, change "Virtual NIC" of "Security > Access
Settings > iLO" to "Disabled".
● Caution for iLO firmware greater than or equal to 1.47 and lower than 2.10 and higher
If you update to iLO5 firmware greater than or equal to 1.47 and lower than 2.10, "Last Firmware Scan
Result" is displayed in "Information > Security Dashboard". Do not click this Hyper link.
If you click this link by mistake, you won't be able to move between menus and tabs.
In that case, you need to reload the page by the reload button of the browser.
Or you log out the current session of iLO Web interface, and please log in again.
- 12 -