READ THIS BEFORE YOU START...
Tools needed for installation:
PARTS supplied for installation:
Cable tie to secure drain hose to standpipe, inlet hose or laundry tub
CABINET DIMENSIONS
WASHER DIMENSIONS
Note:
The height of the washer from top to floor is 33 1\4" this includes the leveling leg screwed all the way in. The customer
can unscrew the leg out an additional 7\8" for a total overall height of 34 1\8".
• Multi wrench
• Utility knife
• Channel lock
• Level
INCH (CM)
2
ELECTRICAL
Refer to serial plate for specific
electrical requirements. For
more detailed information refer
to section on Electrical
Requirements.
WATER
Washer needs two standard
3/4 inch water supply faucets
with a pressure between
20–120 pounds per square inch.
For more detailed information
refer to section on Water
Requirements.
E