Cabinet Dimensions - Maytag Neptune MAH5500BWW Installation Instructions Manual

READ THIS BEFORE YOU START...
Tools needed for installation:
ELECTRICAL
_j=___) i Multi wrench Refer to serial plate for specific
Utility knife electrical requirements. For
Channel lock more detailed information refer
to section on Electrical
5/16 nut driver Requirements.
Level
Screw driver-
fiatblade
WATER
___--__il Washer needs two standard
3/4 inch water supply faucets
with a pressure between
PARTS supplied for installation: 30-120 pounds per square inch.
For more detailed information
Cable tie to secure drain hose to standpipe, inlet hose or laundry tub refer to section on Water
_j__ Requirements.
2 washers and 2 screens for water hoses @ @ _
Washer and screw for external ground (if required) _
4 rubber feet for legs
_) _
CABINET DIMENSIONS
1" rain.
2.54 cm
43-1/4" rnin. _
f..- -., 109.8
cm
C _ r
_-_ 36-1/4" _ ,
c , , _ rain.
I
-, 92.0 3/8" min.
,ore
I_ 27" ,,, 27-1/2" 22-1/4 '!
68.5 cm 69.2 cm 56.5 cm
Page 1