Advertisement
Quick Links
Advertisement
Related Manuals for Pilz PSENop 3.3
Summary of Contents for Pilz PSENop 3.3
- Page 1 PSENop 3.3 PSEN sensor technology Accessories Operating Manual-1003600-EN-02...
- Page 2 Preface This document is a translation of the original document. All rights to this documentation are reserved by Pilz GmbH & Co. KG. Copies may be made for internal purposes. Suggestions and comments for improving this documentation will be gratefully received.
- Page 3 CAUTION! This refers to a hazard that can lead to a less serious or minor injury plus material damage, and also provides information on preventive measures that can be taken. Operating Manual PSENop 3.3 1003600-EN-02...
- Page 4 The reflected light scanner emits a light beam, which is reflected by the reflector. This re- flection is received by the receiver. If an object interrupts the light beam, the receiver de- tects this and the reflected light scanner switches. The transmitter and receiver are in the same housing. Operating Manual PSENop 3.3 1003600-EN-02...
- Page 5 Wire the outputs from the reflected light sensor to the inputs provided on a safety light grid or control system for external muting sensors. Reflected light sensor Function Wire colour Assignment of the 4-pin M12 +10 ... 30 VDC brown male connector Output NC white blue Output NO black Operating Manual PSENop 3.3 1003600-EN-02...
-
Page 6: Installation And Setting
2. Attach the transmitter to the mounting surface using three screws (M4, minimum length 25 mm). Attach reflector 1. On the mounting surface, drill two M4 holes in the required position for the reflector, in accordance with the position of the through holes. Operating Manual PSENop 3.3 1003600-EN-02... - Page 7 LED off: Light beam is not detected (caused by con- taminations, for example), device is not ready for oper- ation LED goes out briefly when an object enters the light beam Operating Manual PSENop 3.3 1003600-EN-02...
-
Page 8: Technical Details
0,50 ms Environmental data Ambient temperature Temperature range -10 - 55 °C Storage temperature Temperature range -20 - 70 °C Vibration In accordance with the standard EN 60068-2-6 Frequency 10,0 - 55,0 Hz Amplitude 0,50 mm Operating Manual PSENop 3.3 1003600-EN-02... -
Page 9: Order Reference
EN ISO 13849-1:2015 PL PL a Order reference Product type Features Order no. PSEN op3.3 Reflex NO/NC M12 Reflected light sensor with NO/NC outputs 630 830 PSEN op Reflector Reflector for reflected light sensor 630 323 Operating Manual PSENop 3.3 1003600-EN-02... - Page 10 Back cover Support Technical support is available from Pilz round the clock. Americas Australia Scandinavia Brazil +61 3 95446300 +45 74436332 +55 11 97569-2804 Spain Canada Europe +34 938497433 +1 888-315-PILZ (315-7459) Austria Switzerland Mexico +43 1 7986263-0 +41 62 88979-30...