Adjustment By The Orthopaedic Technician; Fitting To The Patient; Adjusting The Brace To The Arm Shape By Using An Orthopaedic "Bending Iron - Albrecht CDS SUP-PROSAN User Instructions

CDS SUP-PROSAN
®
User Instructions

2. Adjustment by the orthopaedic technician

2.1. Fitting to the patient

• Our CDS braces are constructed to be adjustable.
®
• The position of the shell components can be changed and they can be shaped.
• The hinge rods can be adapted to the shape of the extremity by using an
orthopaedic bending iron.
• The strap lengths can be adjusted to different girths and shortened if
necessary.
2.1.1. Adjusting the brace to the arm shape by using an
orthopaedic "bending iron"
To ensure that the brace fits perfectly, the hinge rods can be adjusted to the
shape of the patient's arm with the aid of a bending iron.
When adjusting the hinge rods to the shape of the extermity by using
an orthopaedic bending iron, you must not bend the rods in the area
of the hinge housing or the hinge cover as this could lead to damage or
break of the hinge.
8
00800 03032900 – INTERNATIONAL SERVICE-HOTLINE
Bending iron Bending iron