Shipping Details; Environmental Conditions - YOKOGAWA DO72 Instruction Manual

Optical dissolved oxygen sensor
Hide thumbs Also See for DO72:
Table of Contents

Advertisement

8
Common characteristics
Operating temperature:
Pressure:
Flow rate
Response time t90
Ingress protection

2.5 Shipping details

Package size (LxWxH)
Package weight (max.)
Sensor
DO72-W/-T
OEC CA/CB/CC

2.6 Environmental conditions

Storage temperature
Ingress protection
Installation
(at 20°C (68°F), 960-980 hPa (13.92 to 14.21 psi), humidified gas mixtures, after per-
forming a calibration)
Note 1: Temperature measurement for process compensation only
Note 2: Hi flow rate can influence sensor performance
Note 3: From air saturated water to 0 g/L water (e.g. prepared by 1% sodium sulfite solution)
Note 4: Storage stability of the oxygen exchange cap is 5 years if stored under dark and dry
conditions at 20°C (68°F)
IM12J06J02-00EN-P
0 °C to + 50 °C (0 to 122°F)
0 to 12 Barg (0 to 174 psi) (overpressure);
0 to 0.990 Barng (0 to 14.36 psi) (under pres
sure)
2 m/sec or less
≤ 90 sec.
IP X8 according EN 60529:1991/A1:2000/
A2:2013
O-ring of OEC must be replaced once a year
Approx. 300x100x75 mm
Sensor weight g (lbs)
108 (0.23) g (lbs)
6 (0.01) g (lbs)
-10 to +70°C (-14 to 158°F)
IP X8 according EN 60529:1991/
A1:2000/A2:2013
O-ring of OEC must be replaced once a year
Overvoltage Category I
Pollution Degree 2
Altitude 2000 m or less (6561.68 feets)
2
3
(11.8x3.9x3.0 inch)
Total package weight g (lbs)
272 (0.59)g (lbs)
147 (0.32) g (lbs)
4

Advertisement

Table of Contents
loading

Table of Contents