O 2 Reference; Print Pressure - Bacharach Fyrite INSIGHT Instructions Manual

Fyrite INSIGHT
4. Save and return to the Setup Menu or press ESC to cancel.
3.7.7 O Reference
2
The measured value of CO can be referenced to a specific O
0% to 15%. Set up the reference value as follows:
1. Access the Setup Menu per Section 3.7.
2. Select O
3. Select the O
4. Save and return to the Setup Menu or use ESC to cancel.

3.7.8 Print Pressure

Select whether to print or not print the pressure measurement on the com-
bustion test printout as follows:
1. Access the Setup Menu per Section 3.7.
2. Select Print Pressure.
18
• Press ▲ ▼ buttons to scroll/highlight options.
• Press (ENTER) to select or save.
• Press ESC to go back.
Reference.
2
reference value. Range: 0-15.
2
percentage of
2