Fyrite INSIGHT
Power-Up & Run/Hold Screen Overview
3.5
Version: V2.00
8252
Model:
0024-
Serial:
NW1060
▲ ▼
12
Press the PWR button to power up the analyzer.
Information about the device's software version,
model number and serial number will be dis-
played briefly.
A warm up screen, displaying a 60 second count-
down, will then appear.
After the countdown, the Run/Hold screen will
appear in Hold mode. This screen displays a list
of information relative to the combustion pro-
cess.
The ▲ ▼ up/down arrow keys permit scrolling
through the list, as displayed in the illustration.
NOTE:
The following sections, 3.6 Setup Mode and
3.7 Setup Menu, explain how to access Setup
menus and how to make modifications to preset
parameters.
If you wish to use the analyzer without making
setup modifications, go to section 4.0 Opera-
tion.