Bacharach Fyrite INSIGHT Instructions Manual page 67

of a battery wiring harness), service personnel may also need to replace
the pump wiring harness. This is performed only by Bacharach service
personnel. In such cases, wiring harness part numbers are listed in the
following table for service personnel reference. For standard pump replace-
ment orders, however, customers must use the combination pump/harness
part number. Refer to the table below.
Item
Serial # (Back of
Instrument)
PCB Label (To
Con rm Rev #)
Pump/Harness
Part Number
Connector
Style on Pump
Wiring Harness
(Colors May Vary)
PCB Header Style
Wiring Harness
Only (Reference
P/N for Service
Personnel Only)
Parts & Tools Required:
• Replacement pump (P/N 0024-3049 or P/N 0024-3073)
• Medium phillips screwdriver
Procedure:
PCB Rev 0
< RU1025
(= Rev 0)
0024-1450
0 xxxxxxxx
Order P/N: 0024-3049
P/N: 0024-1410
Fyrite INSIGHT
PCB Rev 1
≥ RU1025
(= Rev 1)
0024-1450
1 xxxxxxxx
Order P/N: 0024-3073
P/N: 0024-1521
63