Bacharach Fyrite INSIGHT Instructions Manual page 11

General Characteristics:
Power Requirements
Operating Time
Warm Up Time
Memory
Display
Front Panel Controls
Interfaces
Accuracy:
Oxygen
Carbon Monoxide
Flue Gas Temperature
Ambient/Primary
Temperature
Draft
Tighter CO accuracy in the lower ranges, up to ±2 ppm, may be
*
attained if a lower range calibration gas (e.g. 100 ppm CO) is used.
Four disposable 'AA' Alkaline batteries (op-
tional AC adapter is available)
Minimum of 20 hours continuous operation
(pump running and backlight ON)
60 seconds
Up to 100 complete sets of
combustion, temperature, & pressure
tests can be saved in memory.
128 x 64, LCD Graphic Display
Eleven front panel push buttons
(Refer to Section 3.4)
IrDA printer & USB connectivity
±0.3% O with a typical flue gas
2
concentration of CO
±5% of reading or ±10 ppm, whichever is
greater*, in the range of 0 to 1000 ppm.
±2 °C between 0 & 124 °C
(±4 °F between 32 & 255 °F)
±3 °C between 125 & 249 °C
(±6 °F between 256 & 480 °F)
±4 °C between 250 & 400 °C
(±8 °F between 481 & 752 °F)
±1 °C between 0 & 100 °C
(±2 °F between 32 & 212 °F)
±2% of reading or ±0.05 mB, whichever is greater
in the range of -25 to +25 mB
± 3% in the range of -25 to -100 mB
± 3% in the range of 25 to 100 mB
Fyrite INSIGHT
2
7