JAI GO-5000M-USB-UV User Manual page 87

GO-5000M-USB-UV User Manual (Ver. 1.1)
Specifications
Gamma
Dark compression
Shading Compensation
LUT
HDR
Power supply
Lens mount
Flange back
Optical filter
Operating temperature/Humidity
Performance guaranteed
Storage Temp. / Humidity
Regulation
Housing Dimensions
Weight
Notes:
Note1): Usable performance will be up to 1 second.
l
Note2): Histogram integrity is guaranteed with up to +12dB gain applied.
l
Approximately 5 minutes pre-heating is required to achieve these specifications.
l
The above specifications are subject to change without notice.
l
γ=0.45, 0.6, 1.0 (3 steps are available)
Choice of Linear or Dark compression ON
Flat Field, Block Com. (20 x 16 blocks), Block Size: 128 x 128 pixels
OFF: γ=1.0, ON=32 points can be set
4 settings, Level 1, 2, 3 and 4
Input range
6-Pin
Current
Connector
Power Consumption
Input range
USB Bus Power Current
Power Consumption
C mount, Rear protrusion of the lens is less than 10 mm.
17.526 mm, Tolerance: 0 to -0.05 mm
Protection glass: Not provided
-5°C to +45°C / 20 to 80% (No-condensing)
-25°C to +60°C / 20 to 80% (No-condensing)
CE (EN61000-6-2 and EN61000-6-3), FCC part 15 class B, RoHS, WEEE
29 x 29 x 52 mm (W x H x D) (excluding protrusion)
46g
Description
DC+12V to +24V ± 10% (At the input terminal)
240mA (At 12V input, Full pixels)
2.8W (At 12V input, Full pixels)
DC 5V ± 10%
720mA (At 5V input, Full pixels)
3.6W (At 5V input, Full pixels)
- 87 -
Miscellaneous