JAI GO-5000M-USB-UV User Manual page 28

GO-5000M-USB-UV User Manual (Ver. 1.1)
Line Source Item
User Out 0
User Out 1
Line 5 Opt In
NAND 0 Out
NAND 1 Out
Line Mode
Indicates the status of the item selected in Line Selector.
Line Inverter
Sets the polarity of the selected input or output. (False or True)
Line Status
Indicates the status of the selected signal (input or output) (True=High, False=Low)
Line Format
Indicates the format of the line item selected in Line Selector (No Connect, TTL, LVDS, Opt Coupled or
Internal Signal).
Note: On this camera, TTL and LVDS interface are not equipped.
GPIO
This is a general interface for input and output and controls input and output for trigger signals or valid
signals and pulse generator. By using this interface, you can control an external light source, make a
delayed function to input a trigger signal or make a precise exposure control with PWC trigger.
Connect User Out 0 signal to line item selected in Line Selector
Connect User Out 1 signal to line item selected in Line Selector
Connect Opt In signal to line 6 in Line Selector
Connect NAND 0 signal to line item selected in Line Selector
Connect NAND 1 signal to line item selected in Line Selector
Description
- 28 -
Main Functions