Table of Contents
Advertisement
GO-5000M-USB-UV User Manual (Ver. 1.1)
Specifications
Image Output Format Digital
Acquisition mode
Trigger selector
Exposure Mode
Trigger option
Trigger Overlap
Trigger Input Signal
Opt Filter
Exposure Mode
Exposure Auto
Auto Exposure Response Speed
Video Send mode
Digital I/O
Black Level Adjust.
Analog Base Gain (For manual)
Gain Control
Blemish Comp.
ALC
Full pixels: 2560 (h) x 2048 (v)
Width
16 ~ 2560, 16 pixels/step
OFFSET X
0 ~ 2544, 16 pixels/step
ROI
Height
1 ~ 2048 lines,1 line/step
OFFSET Y
0 ~ 2047 lines, 1 line/step
1
2560(H)
H
2
1280(H)
4
640(H)
Binning
1
2048(V)
V
2
1024(V)
4
512(V)
Bit assignment
Mono8, Mono10, Mono10 Packed, Mono12, Mono12 Packed
Continuous / Single Frame / Multi Frame (1 ~ 255)
Acquisition: Acquisition Start/ Acquisition Stop
Exposure: FrameStart
Transfer: JAI Frame Transfer
OFF, Continuous, Timed (EPS), Trigger Width
OFF / RCT (with ALC function)
Fixed to Readout
Line 5 (Opt In), Software, PG 0, NAND Out 0/1, User out 0/1
5 steps (10 μs (Typ), 100 μs, 500 μs, 1ms, 5ms, 10ms)
Timed
Trigger Width
OFF / Continuous
1 ~ 8
Normal ROI, Multi ROI, Trigger sequence, Command sequence, Delayed readout
Line Selector (6P): GPIO IN / GPIO OUT
Ref. level
Video level adj. range
Adj. range
Resolution
0dB, 6dB, 12dB
Manual: 0dB ~ +24dB (Note2)
Adj. Range: 1 step = x0.01 (0.005dB to 0.08dB) Varies by setting value
Detect white blemish above the threshold value (Black blemish is detected only
Detection
by factory)
Compensation
Complement by adjacent pixels (Continuous blemishes are not compensated)
Numbers
Up to 256 pixels
AGC and auto exposure can be combined and automatically controlled
Description
Exposure Auto: OFF 10 μs (Min.) ~ 8 second (Max.) (Note1), Variable
unit: 1 μs
Exposure Auto: Continuous 10 μs (Min.) ~ 8 second (Max.) (Note1),
Variable unit: 1 μs
10 μs (Min) ~ ∞ (Max) (Note1)
33.5LSB 10-bit (Average value of 100*100)
0 ~ approx. 100LSB
-256 ~ +255LSB 10-bit
1 STEP = 0.25LSB
- 86 -
Miscellaneous
Advertisement
Table of Contents
