High-Density I/O Units Classified As Special I/O Units - Omron C200HX-CPU E Series Installation Manual

Units

2-2-8 High-density I/O Units Classified as Special I/O Units

Unit
TTL Input Unit
DC Input Unit
TTL Output Unit
Transistor Output Unit
TTL I/O Unit
DC Input/Transistor Output Unit p p
1, 2, 3...
30
Some High-density I/O Units are classified as Special I/O Units. Up to 10 or up to
16 Special I/O Units can be connected to a PC depending on the CPU Unit that is
used. These Units have two 24-pin connectors. In general, these Units control
32 I/O points, although some Units can control 128 I/O points when set for
dynamic operation.
Refer to Appendix B Specifications for detailed specifications and dimensions of
the Units.
Model Number
C200H-ID501
C200H-ID215
C200H-OD501
C200H-OD215
C200H-MD501
C200H-MD115
C200H-MD215
1. I/O Unit Lock Notch
The lock notch fits into the Backplane to hold the Unit in place.
2. Nameplate
The nameplate shows the model number of the Unit.
3. I/O Indicators (LED)
The indicators show the ON/OFF status of the I/O points.
4. Unit Number Setting Switch
Turn OFF the power supply to the PC and set the unit number to between 0
and F using a flat-blade screwdriver, being careful not to damage the slot or
leave the switch set half-way between two settings.
5. 24-pin Connectors
There are two 24-pin connectors.
Specifications
5 VDC, 32 inputs
24 VDC; 32 inputs
5 VDC, 32 outputs
24 VDC; 32 outputs
5 VDC, 16 inputs, 16 outputs
12 VDC; 16 inputs, 16 outputs
24 VDC; 16 inputs, 16 outputs
1. I/O Unit lock notch
2. Nameplate
3. I/O indicators LED
4. Unit number setting switch
5. 24-pin connectors
Section 2-2