Set Https; Security Audit Log - HIKVISION DS-2DE2C200SCG-E User Manual

Allowed Only IP addresses in the list can access the device.
4. Edit the IP address filter list.
Add Add a new IP address or IP address range to the list.
Modify Modify the selected IP address or IP address range in the list.
Delete Delete the selected IP address or IP address range in the list.
5. Click Save.

10.12.3 Set HTTPS

HTTPS is a network protocol that enables encrypted transmission and identity authentication,
which improves the security of remote access.
Steps
1. Go to Configuration → Network → Advanced Settings → HTTPS .
2. Check Enable.
3. Optional: Check HTTPS Browsing to access the device only via HTTPS protocol.
4. Select a server certificate.
Note
Complete certificate management before selecting server certificate. Refer to Certificate
●
Management for detailed information.
If the function is abnormal, check if the selected certificate is abnormal in Certificate
●
Management.
5. Click Save.

10.12.4 Security Audit Log

The security audit logs refer to the security operation logs. You can search and analyze the security
log files of the device so as to find out the illegal intrusion and troubleshoot the security events.
Security audit logs can be saved on device internal storage. The log will be saved every half hour
after device booting. Due to limited storage space, you can also save the logs on a log server.
Search Security Audit Logs
You can search and analyze the security log files of the device so as to find out the illegal intrusion
and troubleshoot the security events.
Network Speed Dome User Manual
82