Table of Contents
Advertisement
Sensitivity
The higher the value of sensitivity is, the more sensitive the motion detection is. If scheduled
image settings is enabled, the sensitivity of day and night can be set separately.
3. Select an Area and click Draw Area. Click and drag the mouse on the live image and then release
the mouse to finish drawing one area.
Stop Drawing Finish drawing one area.
Clear All
4. Click Save.
5. Optional: Repeat above steps to set multiple areas.
7.1.2 Set Video Tampering Alarm
When the configured area is covered and cannot be monitored normally, the alarm is triggered and
the device takes certain alarm response actions.
Steps
1. Go to Configuration → Event → Basic Event → Video Tampering .
2. Check Enable.
3. Set the Sensitivity. The higher the value is, the easier to detect the area covering.
4. Click Draw Area and drag the mouse in the live view to draw the area.
Stop Drawing Finish drawing.
Clear All
Network Speed Dome User Manual
Figure 7-2 Set Rules
Delete all the areas.
Delete all the drawn areas.
47
Advertisement
Table of Contents
