Summary of Contents for HIKVISION DS-KB8113-IME1(B) Series
Page 1
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual...
Page 2
WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,...
Page 3
During the use of device, personal data will be collected, stored and processed. To protect data, the development of Hikvision devices incorporates privacy by design principles. For example, for device with facial recognition features, biometrics data is stored in your device with encryption method;...
Page 4
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates a hazardous situation which, if not avoided, will or could Danger result in death or serious injury.
Page 5
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual Safety Instruction Warning All the electronic operation should be strictly compliance with the electrical safety regulations, ● fire prevention regulations and other related regulations in your local region. Please use the power adapter, which is provided by normal company. The power consumption ●...
Page 6
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual Improper use or replacement of the battery may result in hazard of explosion. Replace with the ● same or equivalent type only. Dispose of used batteries according to the instructions provided by the battery manufacturer.
Page 7
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Page 8
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual under the EMC Directive 2014/30/EU, RE Directive 2014/53/EU,the RoHS Directive 2011/65/EU 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points.
Page 9
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual Cet équipement doit être installé et utilisé à une distance minimale de 20 cm entre le radiateur et votre corps. viii...
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual Chapter 1 Appearance Figure 1-1 Appearance Table 1-1 Component Description Description Microphone Built-in Camera Low Illumination Supplement Light...
Page 13
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual Description Call Button Loudspeaker...
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual 2.2 Wiring Description 2.2.1 Door Lock Wiring Terminal NC/COM is set as default for connecting magnetic lock/electric bolt; terminal NO/ COM is set as default for connecting electric strike. To connect electric lock, it is required to set the output of terminal NC/COM/NO to be electric lock via Batch Configuration Tool or iVMS-4200 client software or the web browser.
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual 2.2.2 Door Contact Wiring To connect door contact, it is required to set the output of terminal AI to be door status via Batch Configuration Tool or iVMS-4200 client software or the web browser.
Page 17
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual Figure 2-4 Exit Button Wiring...
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual 2.2.4 Alarm Device Input Wiring When you set the output of terminal AI to be custom via Batch Configuration Tool or iVMS-4200 client software or the web browser, you can connect any alarm input device to the door station via the terminal AI.
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual Chapter 3 Door Station Installation 3.1 Wall Mounting Plate To install the door station onto the wall, you are required to use a matched mounting plate. Figure 3-1 Wall Mounting Plate 3.2 Wall Mounting Steps 1.
Page 20
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual Figure 3-2 Install the Plate 2. Insert terminal blocks into the interfaces of the door station body, and connect the network cable.
Page 21
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual Figure 3-3 Insert Terminals and Network Cable 3. Fix the door station body to the protective shield tightly.
Page 22
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual Figure 3-4 Fix the Body to the Shield 4. Hook the door station to the wall mounting plate tightly.
Page 23
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual Figure 3-5 Hook the Door Station to the Plate 5. Use the set screw to secure the door station with the mounting plate.
Page 24
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual Figure 3-6 Secure the Door Station...
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual Chapter 4 Activate Device via Web You are required to activate the device first by setting a strong password for it before you can use the device. Default parameters of the door station are as follows: Default IP Address: 192.0.0.65.
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual Chapter 5 Remote Configuration via Indoor Station 5.1 Set Up Door Station via Indoor Station Steps 1. Choose Language and tap Next. 2. Set network parameters and tap Next - Edit Local IP, Subnet Mask and Gateway parameters.
Page 27
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual Note Besides the indoor station, you can also unlock the door by the master station, the client ● software, and the web. When the video intercom between you and the resident is realized, you can speak to the ●...
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual Chapter 6 Remote Configuration via Mobile Client 6.1 Set Up Mobile Client Before You Start Make sure your mobile device has been connected to Wi-Fi. Hik-Connect client is necessary for door station configuration and operation.
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual 6.3 Remote Operation via Client You can realize some certain functions of the door station via Hik-Connect (including, but not limited to, live view, and remote playback). Live View Tap the door station in the list to open the floating windows. And then tap the floating window to enter the Live View page.
Page 30
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual Figure 6-1 Playback Synchronize Time On the Live View page, tap ... → Settings , you can set the time of door station. Tap Time Zone to select the right time zone. Tap Date Format to change the format.
Page 31
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual Alarm Notification On the Live View page, tap ... → Settings → Notification , slide the slider to enable alarm notification. Tap Draw Motion Detection Area and select area. Tap to save. Figure 6-2 Draw Motion Detection Area Tap Motion Detection Sensitivity to adjust the sensitivity.
Page 32
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual Note The messages will be pushed automatically by enabling Receive Events and Push Notifications. ● The client can receive the triggered alarm automatically when the door station is powered on by ● Receive Events but NOT Push Notifications.
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual Chapter 7 Remote Configuration via Web 7.1 Live View In the browser address bar, enter the IP address of the device, and press the Enter key to enter the login page. Enter the user name and password and click Login to enter the Live View page. Or you can click Live View to enter the page.
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual Basic Information Click Add to add users. Enter the Employee ID, Name, Floor No. and Room No., Set the ● Start Time and End Time. You can set the user as Administrator. Note If you disable Always Valid, setting start time and end time is necessary.
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual 7.4 Configuration 7.4.1 Local Parameters Settings You can configure the parameters of the live view, record files and captured pictures. The record files and captured pictures are the ones you record and capture by using the web browser. You can also set and view the saving paths of the captured pictures and recorded videos on the PC that running the web browser.
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual Select the image format for picture capture. Click Save to enable the settings. Record File Parameters Record File Size Select the packed size of the manually recorded and downloaded video files to 256M, 512M or 1G.
Page 37
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual Click System Settings → DST to check Enable DST. Set the parameters according to your needs and click Save to enable the settings. About Click System Settings → About and click Open Source Software Licenses to view the details.
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual Note We highly recommend you to create a strong password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.
Page 39
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual Figure 7-3 Port Settings 2. Set the ports of the device. HTTP Port The default port number is 80, and it can be changed to any port No. which is not occupied. RTSP Port The default port number is 554.
Page 40
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual Figure 7-4 SIP Settings 2. Check Enable VOIP Gateway. 3. Configure the SIP parameters. 4. Click Save to enable the settings. FTP Settings Steps 1. Click Network → Advanced → FTP to enter the settings page.
Page 41
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual Figure 7-5 FTP Settings...
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual 2. Check Enable FTP. 3. Select Server Type. 4. Input the Server IP Address and Port. 5. Configure the FTP Settings, and the user name and password are required for the server login.
Page 43
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual Figure 7-6 Video Parameters 2. Select the Stream Type. 3. Configure the video parameters. Stream Type Select the stream type to main stream or sub stream. Video Type The video type is set as Video&Audio by default.
Page 44
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual Frame Rate Set the frame rate. The frame rate is to describe the frequency at which the video stream is updated and it is measured by frames per second (fps). A higher frame rate is advantageous when there is movement in the video stream, as it maintains image quality throughout.
Page 45
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual Figure 7-7 Audio Settings 2. Configure the stream type and the audio encoding type. Audio Channel Select the audio channel to adjust the audio parameters. Stream Type Select the stream type to main stream or sub stream.
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual 7.4.5 Image Settings Display Settings Configure the image adjustment, backlight settings and other parameters in display settings. Steps 1. Click Image → Display Settings to enter the display settings page. Figure 7-8 Display Settings 2.
Page 47
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual Sharpness Sharpness describes the edge contrast of the image, which ranges from 1 to 100. 5. Set the Day/Night Switch. Figure 7-9 Day/Night Switch - Set Daytime or Night. - Set the mode as Auto and edit the sensitivity according to your needs.
Page 48
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual OSD Settings You can customize the camera name, time/date format on the live view. Steps 1. Click Image → OSD to enter the settings page. Figure 7-11 OSD 2. Check to enable Display Name, Display Date or Display Week at your actual needs.
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual Note You can select Cropping Resolution as 704*576, 1280*720, or 1920*1080. ● You can zoom in or zoom out the image by selecting Cropping Resolution after clicking Save. ● 7.4.6 Event Settings Motion Detection Motion detection detects the moving objects in the configured security area, and a series of actions can be taken when the alarm is triggered.
Page 50
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual Figure 7-12 Motion Detection 2. Click to Enable Motion Detection. 3. Click Draw Area. Click and drag to draw a motion detection area. Clear Area Click Clear All to clear all of the areas.
Page 51
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual Delete Schedule Click Delete to delete the current arming schedule. 6. Click Linkage Method to enable the linkages. Notify Security Center Send an exception or alarm signal to the remote management software when an event occurs.
Page 52
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual Figure 7-13 Event Linkage...
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual 2. Select the Major Type as Device Event or Door Event. 3. Select the Minor Type. - For device event, the Minor Type is set as Tampering Alaem by default. - For door event, select Minor Type as Door Open Timed Out (Door Contact).
Page 54
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual Figure 7-14 Session Settings 2. Set Registration Password. 3. Set Main Station IP and Private Server IP. 4. Slide to enable Protocol 1.0. 5. Click Save to enable the settings. Call Settings Go to Intercom → Call Settings to enter the page.
Page 55
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual Press Button to Call Steps 1. Click Intercom → Press Button to Call to enter the setting page. 2. Check Call Management Centeror Call Specified Indoor Station to set the button. Note If you check Call Specified Indoor Station, you should enter the specified indoor station No.
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual Figure 7-15 Number Settings Click Add, set the Room No. and SIP numbers in the pop-up dialog box. 7.4.8 Access Control Settings Door Parameters Set the parameters of the door which is linked to the device.
Page 57
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual Figure 7-16 Door Parameters 2. Select Door No., and edit the Name. 3. Set Open Duration. When the time to open over the open duration you set, the door will be locked again.
DS-KB8113-IME1(B) Series Vandal-Resistant Door Station User Manual Appendix A. Appendix Installation Notice While installing the door station, make sure that the distance between any two devices is far enough to avoid the howling and echo. The distance between two devices is recommended to be longer than 10 meters.
Device Command Scan the following QR code to get the device common serial port commands. Note that the command list contains all commonly used serial ports commands for all Hikvision access control and video intercom devices. Figure B-2 Device Command...
Need help?
Do you have a question about the DS-KB8113-IME1(B) Series and is the answer not in the manual?
Questions and answers