Table of Contents
Advertisement
VENTING YOUR PELLET STOVE INTO AN
EXISTING CLASS A 6" CHIMNEY SYSTEM
IMPORTANT:
If you are installing your pellet stove as a replacement
to an existing wood stove, you can install your pellet
stove using the existing class A 6" venting system.
1.
You must have the existing chimney system cleaned
and/ or inspected by a qualified chimney sweep before
proceeding with the installation of your pellet stove.
2. To the right is an example of an installation using part
number 860001, 3-6" transition into 6" connector pipe.
the illustration is only an example. Please conform
to any local building codes or regulations having
jurisdiction before you have a qualified installer
proceed with this installation.
© 2022 United States Stove Company
10
INSTALLATION
Advertisement
Table of Contents
