Chapter 1 Overview; Overview Of This Manual; Terms Explanation - Raisecom ISCOM2828F User Manual

Table of Contents

Advertisement

www.raisecom.com

1.1 Overview of this manual

This manual mainly discusses the installation of ISCOM2828F switch. It describes the features of the
switch, introduces its components and the functions these components accomplish. The manual
brings forth a normative installation procedure for users and explains the types and specifications of
all cables applied during the installation.
This manual focuses on the hardware installation and employment of ISCOM2828F switch. For the
configuration and operations of the switch based on software, please refer to the corresponding
software configuration guide.

1.2 Terms explanation

10BASE-T
100BASE-TX
1000BASE-X
Auto
Negotiation
Full Duplex
Half Duplex
RJ-45
MDI
MDIX

Chapter 1 Overview

A term in IEEE 802.3 for Ethernet over CAT-3 or better twisted pair,
based on Manchester coding and running at 10Mbps.
A term in IEEE 802.3 for Fast Ethernet over CAT-5 twisted pair, based on
4B/5B coding and running at 100Mbps.
A term in IEEE 802.3 for Gigabit Ethernet over fiber, based on 8B/10B
coding and running at 1000Mbps.
The auto negotiation procedure is: the port at one site adapts its bit rate
and duplex mode to the highest level it and the opposite site device both
support according to the bit rate and duplex mode adopted by the remote
site device, that is, the connected devices on both site adopt the fastest
transmission mode they both support after the auto negotiation process.
A communication pattern that allows communication in both directions
simultaneously.
A communication pattern that allows communication in both directions,
but only one direction at one time.
The 8 position modular connector applied in twisted pair cable link
Medium Dependent Interface, the name for the connector physically and
electrically connects the media converter and the media segment.
Medium Dependent Interface Crossover, it sends the transmitting signal
of a device to the receiving port of the opposite device and vice versa.
User Manual
3

Advertisement

Table of Contents
loading

Table of Contents