Details Of The Function Table - A&D BM-5 Instruction Manual

Details of the Function Table

10.2.
Class Item and Parameter
Cond
Condition
5t-b
Stability band width
ploc
Display lock function
ba5fnc
trc
Environment
Zero tracking
Display
5pd
Display refresh rate
pnt
Decimal point
p-on
Auto display-ON
beep
Beep
Cl adj
Refer to "10.7. Clock and Calendar Function"
Clock
prt
Data output mode
dout
ap-p
Data output
Auto print polarity
ap-b
Auto print
difference
data
Data memory
#1 The unit of readability is digit.
Example: If 1 mg display is selected using the
#2 Usable readability of the balance is one digit.
Example: In gram display, one digit is 0.01 mg for the BM-252 and 0.1 mg for the BM-300.
0 Fast response, sensitive value
1
2 Slow response, stable value
0 Stable range is ±1 digit
1
±2 digit #1
2 Stable range is ±3 digits
off OFF
on ON
0 OFF
1 Normal
2 Strong
3 Very strong
0 5 times/second
1 10 times/second
0 Point (.)
1 Comma (,)
off OFF
on ON
off OFF
on ON
0 Key mode
1 Auto print mode A
Reference = zero
2 Auto print mode B
Reference = last stable value
Stream mode /
3
Interval mode
0 Plus only
1 Minus only
2 Both
0 10 digits
1 100 digits
2 1000 digits
0 Not used
1 Stores the weighing data
2 Stores the calibration data
: Factory settings.
RANGE
48
Description
FAST
Can be changed by
MID.
response adjustment.
SLOW
The stabilization indicator
illuminates when the display
fluctuation is within the range.
Display lock function to measure the
volume dispensed from the pipette.
Keeps zero display by tracking
zero drift.
Period to refresh the display
Decimal point format
Turns on the weighing mode display
when the AC adapter is connected.
Sounds a beep when a key is
touched.
The time and date are added to
the output data.
Accepts the
when the display is stable.
Outputs data when the display is
stable and conditions of ap-p,
ap-b and the reference value are
met.
With data 0, outputs data
continuously; with data 1, uses
interval memory.
Displayed value > Reference
Displayed value < Reference
Regardless of displayed value
Difference between reference
value and displayed value
#2
Related items:
prt, int, d-no, 5-td, info
key for the BM-300, 1 mg is one digit.
key only
PRINT
BM series