Supermicro H12DGQ-NT6 User Manual page 80

H12DGQ-NT6 User's Manual
Enroll Efi Image
Select this feature and press the <Enter> key to specify an EFI (Extensible Firmware
Interface) image for the system to use when it operates in the Secure Boot mode.
Device Guard Ready
Remove 'UEFI CA' from DB
Select Yes to remove UEFI CA from the database. The options are Yes and No.
Restore DB defaults
Select Yes to restore database variables to the manufacturer default settings. The op-
tions are Yes and No.
Secure Boot Variable/Size/Keys/Key Source
Platform Key (PK)
This feature allows the user to enter and configure a set of values to be used as platform
firmware keys for the system. The sizes, keys numbers, and key sources of the platform
keys will be indicated as well. Select Update to update the platform key.
Key Exchange Keys
This feature allows the user to enter and configure a set of values to be used as Key-
Exchange-Keys for the system. The sizes, keys numbers, and key sources of the Key-
Exchange-Keys will be indicated as well. Select Update to update your "Key Exchange
Keys". Select Append to append your "Key Exchange Keys".
Authorized Signatures
This feature allows the user to enter and configure a set of values to be used as Autho-
rized Signatures for the system. These values also indicate the sizes, keys numbers,
and the sources of the authorized signatures. Select Update to update your "Authorized
Signatures". Select Append to append your "Authorized Signatures". The settings are
Update, and Append.
Forbidden Signatures
This feature allows the user to enter and configure a set of values to be used as For-
bidden Signatures for the system. These values also indicate sizes, keys numbers,
and key sources of the forbidden signatures. Select Update to update your "Forbidden
80