Supermicro H12DGQ-NT6 User Manual page 72

H12DGQ-NT6 User's Manual
Certification GUID
This feature displays the GUID for this system.
Commit Changes and Exit
Select this feature to keep the changes you have made and exit from the system.
Discard Changes and Exit
Select this feature to discard the changes you have made and exit from the system.
Delete Certification
If this feature is set to Enable, the certificate enrolled in the system will be deleted.
The options are Enable and Disable.
RAM Disk Configuration
This feature allows the user to configure the settings for the RAM disks installed in the system.
Disk Memory Type
This feature specifies the type of memory that is available for you to create a RAM disk. The
options are Boot Service Data and Reserved.
Create a raw
This feature allows you to create a raw RAM disk from all available memory modules in
the system. When you select this submenu and press the <Enter> key, the following items
will display:
•
Size (Hex): Use this feature to set the size of the raw RAM disk. The default setting is 1.
•
Create & Exit: Select this feature when you want to exit from this submenu after you've
created a raw RAM disk.
•
Discard & Exit: Select this feature when you want to abandon the changes you've made
and to exit from the submenu.
72