Supermicro H12DGQ-NT6 User Manual page 70

H12DGQ-NT6 User's Manual
SATA Configuration
This section displays the detected SATA devices installed on the system.
SATA Enable
This setting enables or disables the on chip SATA controller. The options are Disabled,
Enabled, and Auto.
SATA Hotplug
This setting enables or disables the on chip SATA hot plug feature. The options are Disabled,
and Enabled.
SATA Information
This section displays information on the detected SATA devices:
•
SATA0 ~ SATA3
HTTP Boot Configuration
HTTP Boot Policy
The options include Apply to all LANs, Apply to each LAN, and Boot Priority #1 instantly.
HTTP Boot Checks Hostname
Use this feature to enable or disable HTTPS Boot to check if the hostname of TLS certificates
matches the hostname provided by the remote server. The options include Enabled and
Disabled (Warning: Security Risk!).
Priority of HTTP Boot
Instance of Priority 1:
Enter a value to set the rank target port. The default value is 1
Select IPv4 or IPv6
Use this feature to select the targeted LAN port to boot from. The options are IPv4 and IPv6.
Boot Description
Highlight the feature and press the <Enter> key to create a description of no more than 75
characters.
Boot URI
Highlight the feature and press enter to create a boot URI of no more than 128 characters.
70