Advertisement
Quick Links
uniquegardendecor.com
(866) 382-8600
NOTE: Component drawings are not to scale
PK120 pump (1)
#10 compression stopper (1)
Approx. 15"length of ½" Black non-kink tubing (1)
Wedges (2)
Hose clamps (3)
4mm Allen wrench (1)
Note – Hose clamps can be used as flow restrictor
FT-73 Genesis II Fountain
(4 pieces)
COMPONENTS AND PARTS LIST
Pump
Pump Kit Parts List
5.5"L x 7.25"W x 5.5"H
compression
stopper
Tools you will need
Level
4mm Allen wrench (included)
This fountain uses cover FTNCOV-SM
Revised May 24, 2012
FT-73A
16"L x 16"W x 12"H
90 lbs
Non kink tubing
FT-73B
12 lbs
FT-73BB
4.5"L x 7.25"W x 3.75"H
2 lbs
FT-73C
27"L x 18"W x 8.25"H
188 lbs
Advertisement
Summary of Contents for YARDART Genesis II FT-73
- Page 1 FT-73 Genesis II Fountain (4 pieces) Revised May 24, 2012 COMPONENTS AND PARTS LIST uniquegardendecor.com (866) 382-8600 FT-73A 16”L x 16”W x 12”H 90 lbs Non kink tubing FT-73B 5.5”L x 7.25”W x 5.5”H 12 lbs FT-73BB 4.5”L x 7.25”W x 3.75”H 2 lbs NOTE: Component drawings are not to scale Pump...
- Page 2 FT-73 Genesis II Fountain (4 pieces) Revised May 24, 2012 ASSEMBLY INSTRUCTIONS 1. Make sure you are assembling your fountain on a level surface. 2. Place the Basin (FT-73C) into position where the fountain will be installed. 3. Feed the pump cord through the hole in the basin leaving enough cord length to work with the pump outside the pump cover.