Configuring Patterns - HIKVISION DS-2AE5232TI-A User Manual

Hd-tvi speed dome
Table of Contents

Advertisement

User Manual of HD-TVI Speed Dome
(2) Click up/down direction buttons to choose the number and locate the preset to be edited.
(3) Click left/right direction buttons to position the cursor to the column of PRESET, DWELL and
SPEED. You can click the up/down direction buttons to set the value of preset number, dwell
time and patrol speed.
The presets you set for a patrol should be the ones that have been pre-defined by users.
The dwell time (0~800 seconds selectable, which are divided into 30 levels) is the time
that the speed dome stays on a certain preset; the patrol speed (level 1~40 selectable) is
the scanning speed the speed dome switching between the presets.
(4) Follow the above steps to define the other presets for the selected patrol. You can configure
up to 32 presets in sequence for a patrol. Press IRIS+ to save the new settings or press IRIS-
to cancel and return to the previous menu.
4. Preview the patrol.
Move the cursor to PREVIEW and click IRIS+ to preview the current patrol. You can click IRS+
again to stop the preview.
5. Call the defined patrol.
You can call the special presets to call the defined patrol. E.g. call preset 35 to call patrol 1.
Please refer to Section 2.3 to find the corresponding preset number for each patrol.
6. Delete a patrol.
You can move the cursor to CLEAR PATROL and click IRIS+ to delete the current patrol.
7. Define the dwell time when running the fast patrol.
If you call the No.46 preset to enable the fast patrol, the speed dome will run the patrol
automatically according to the route consists of the configured preset 1 to preset 32. And you
can set the Patrol_D time switches from one preset to the other. 5S, 10S, 20S, 30S, and 60S are
selectable.

3.4.4 Configuring Patterns

Purpose:
A pattern is a memorized, repeatable series of pan, tilt, zoom and preset movements that can be
recalled by a command or automatically performed by a configured function (alarm, park, time task,
and power-up).
Steps:
1. Move the cursor to enter the PATTERNS submenu:
MAIN MENU > DOME SETTINGS > PATTERNS
31

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ds-2ae5230t-a3Ds-2ae5123t-aDs-2ae7230ti-a

Table of Contents