Sungrow SG30CX Quick Manual page 10

Set date and time
Select Clock Source to 'NTP' and Time Zone to 'UTC+10:00' and make sure to Save
Device list
Navigate to 'Device' section and click 'Auto search'; the connecting devices will be
display under 'Device List' section if connection is correct. Sungrow's inverters will be
automatically detected as long as they are correctly connected and energised.
Meanwhile, you can confirm the communication status for each device under
Communication status section. Green icon indicates the connection works and red
icon means no connection between Logger1000 and other device.
TD_202005_Logger1000_Quick Guide for SG30-50-110CX Inverters_V1.3 Page 10 of 16
© SUNGROW AUSTRALIA GROUP PTY LTD All rights reserved.
As we continuously improving our products, changes to this document may occur without notice.