Loading The Film - Mamiya 7 User Manual

[Memo clip]
This memo clip on the back cover is used
to hold the film box tab to serve as a
convenient reminder of the type of film in
the camera or for recording other data.

Loading the Film

1. Push the spool release lever on right
side to the right, and install the take-up
spool in the take-up spool chamber, top
first, then push the lower spool stud up.
2. Like installing the take-up spool, push
the spool release lever on left side to the
left, place a roll of film in the film chamber,
making sure it seats properly. Make sure
the backing paper is in the position
illustrated above, black side facing the
lens, colored side towards the back.
* The product identification number, and
other data are printed on the outside of the
backing paper. If not visible, the film has
been loaded incorrectly. Simply remove
and position properly.
* When loading film or installing the
take-up spool, carefully place the spool in
the stud and make sure it is seated
properly by gently turning to the right or left
so that it engages smoothly.
13