Loading Film In The Magazine - Mamiya 645AFD Instructions Manual

Loading Film in the Magazine

Film can be loaded into the magazine whether it is attached to the camera
or not.
Be sure to align the Lock Pins with the holes in the Pressure Plate.
The film type should be displayed on the magazine's LCD Panel
when the insert is loaded into the magazine.
When the Pressure Plate is erroneously set:
1. Open the magazine's Back Cover.
Simultaneously push down button (A)
while pressing button (B) in.
2. Remove the Roll Film Insert.
Squeeze the center "645" block be-
tween your finders, and then pull
out the insert.
When you load film for the first time,
remove and discard the protective
paper cover that is attached to the
film rails in the magazine.
3. Set the film type (120 or 220).
Push and hold the Pressure Shaft (D)
so that the Pressure Plate may be set
to the film type.
21