Mamiya Leaf Credo Quick Manual
Mamiya Leaf Credo Quick Manual

Mamiya Leaf Credo Quick Manual

Digital back with mamiya 645df system

Advertisement

Quick Links

Leaf Credo Digital Back
with
Mamiya 645DF System
Quick Guide
1

Advertisement

Table of Contents
loading

Summary of Contents for Mamiya Leaf Credo

  • Page 1 Leaf Credo Digital Back with Mamiya 645DF System Quick Guide...
  • Page 2: Table Of Contents

    11. Evaluating your Shot ...........18 • Optical cleaning wipes 12. Editing your Images.............20 • Leaf Credo Quick Guide • Mamiya focusing screen 44 x 33 mm (Credo 40 only) 13. Changing the Focusing Screen ........22 14. Custom Camera Functions .........24 15. Installing software ............26 Leaf Limited Warranty ............27...
  • Page 3: Overview

    2. Overview 1. Eyepiece shutter lever 1. Rubber eye piece 2. Hot shoe 2. Digital Back 3. Exposure mode dial 3. Self timer/interval button 4. Mirror (do not touch) 4. Main LCD backlight button 5. Electronic contacts 5. Multiple exposure button/ Focus point selector button 6.
  • Page 4: Before You Start

    3. Before You Start 1. Insert camera batteries 3. Charge batteries Ensure the drive dial is set to L (off). Lift the battery case and Connect the unit to an electrical outlet and charge each pull out the battery holder. Check batteries are installed then battery (approximately 2.5 to 3 hours).
  • Page 5: Mounting The Leaf Credo Back

    4. Mounting the Leaf Credo Back Remove the back cover from the camera. While holding down the back release button, push the back and camera body together firmly. Unlock the back by sliding the back lock away from the camera. Release the back release button. While holding down the back release button, remove the Slide the back lock to the locked position (towards the sensor cover plate from the back.
  • Page 6: Getting Started

    5. Getting Started 3. Turn on the digital back 1. Turn on the camera Switch the drive dial to "S". Press and briefly hold the on/off button on the Leaf Credo back. Choose your preferred exposure mode using the exposure The system is ready to shoot when you hear the beep and mode dial.
  • Page 7: Using The Soft Buttons

    6. Using the Soft Buttons 7. Navigating the Back Menu Home Button Returns to the main menu screen White balance: Browse Button • Auto Tap takes you to browse view from any screen • Daylight • Tungsten Camera Settings: Back Button • Format CF card • Fluorescent Takes you back to the previous screen • Live View...
  • Page 8: Taking A Shot

    8. Setting Up the 9. Taking a Shot Digital Back Press the release button to start shooting. Configure the following: • Interface language • Date and Time...
  • Page 9: Browsing Images

    10. Browsing Images • Tap browse soft button to access images. • Pan across image using bottom or left area. • Swipe bottom to see other images. • Side zoom control. • Single tap to select an image. • Tap screen to wake up back. • Double tap on image to view in 100%.
  • Page 10: Evaluating Your Shot

    11. Evaluating your Shot • Tap small histogram. • Check sharpness with zoom. • Set white balance: • View detailed histogram. 1. Tap on screen to access full-screen image. 2. Tap Dynamic menu soft button. 3. Tap WB icon. 4. Use picker to select neutral balance. • Tap over-exposure warnings.
  • Page 11: Editing Your Images

    12. Editing your Images • Browse your images. • Rate your images. Tap Dynamic soft button for rating menu. • Tap stars to rate images. • Delete an image by tapping the Dynamic button and tapping trash icon. A long tap on a thumbnail enables multiple selection.
  • Page 12: Changing The Focusing Screen

    * Do not touch the mirror or allow it to be damaged in • If the focusing screen needs cleaning, send it to the nearest any way. authorized Mamiya service center. Do not attempt to clean the surface of the focusing screen, as it is very delicate.
  • Page 13: Custom Camera Functions

    14. Custom Camera Functions C-00 – Select user configuration: A, B, C Words and letters on the camera’s LCD are abbreviated due to limitations of space and available letters C-01 – TV/AV/Exp step: 1/3, 1/2 or 1 EV C-02 – Aperture setting after lens change Display examples Display examples in the C-03 – Time to sleep mode (def. 15 sec) of the main LCD custom function mode C-04 – Battery type (Alkaline or Nimh/NiCD)
  • Page 14: Installing Software

    15. Installing Software Leaf Limited Warranty Warranty Coverage Leaf warrants the digital camera back against defects in materials and Install Capture One workmanship for a period of one (1) year from the date of original retail Capture One is supplied on a CD or you can download it from purchase.
  • Page 15 http://www.mamiyaleaf.com © 2012 65300991-B CREDO QUICK GUIDE...

Table of Contents