Advertisement
Quick Links
AWM Tilt Bracket
COMPONENT CHECKLIST
A
VESA Plate
(x1)
IMPORTANT INFORMATION
! Please ensure this product is installed as per these installation instructions.
! Each Tilt Bracket supports a maximum weight as per above capacity specification.
! This product is not suitable for outdoor use.
! Do not use this product for mobile applications.
!
The manufacturer accepts no responsibility for incorrect installation.
!
This product is compatible with Atdec AWM Series products.
! VESA mounted accessories (such as mini PC brackets and mounts), and offset VESA locations exert additional
leverage that can exceed the capacity of the mount even though the monitor weight may be within the stated range.
Please contact Atdec if you would like further information.
C
M4x10
Screw
(x4)
E
10mm
Spacer
(4x)
B
Bracket
(x1)
Installation Guide
D
REQUIRED TOOLS
M4x20
Screw
• Phillips Head Screwdriver
(x4)
WEIGHT RANGE
Flat Monitor
F
4.5 - 25kg (10 - 55lb)
4mm
Hex Key
Curved Monitor
(x1)
4.5 - 18kg (10 - 40lb)
Display Size
24" - 55"
300mm (12") max
overall display depth
AWM-BT
AWM-BT Page 1 of 3
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Atdec AWM-BT
Summary of Contents for Atdec AWM-BT
- Page 1 ! Please ensure this product is installed as per these installation instructions. ! Each Tilt Bracket supports a maximum weight as per above capacity specification. ! This product is not suitable for outdoor use. ! Do not use this product for mobile applications. The manufacturer accepts no responsibility for incorrect installation. This product is compatible with Atdec AWM Series products. ! VESA mounted accessories (such as mini PC brackets and mounts), and offset VESA locations exert additional leverage that can exceed the capacity of the mount even though the monitor weight may be within the stated range. Please contact Atdec if you would like further information. AWM-BT Page 1 of 3...
- Page 2 When using Grommet Clamp (AC-GC) Tilt Bracket can be positioned with display facing forwards or backwards on the post. WORK SURFACE WORK SURFACE WORK SURFACE WORK SURFACE 2.2 Line up the inner guide on 2.3 Firmly tighten rear of bracket with rear channel hand knob at on post. Slide inner guide into chosen height. channel and lower bracket. Arrow side towards user TIGHTEN AWM POST (not supplied) AWM-BT Page 2 of 3...
- Page 3 No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd. Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. ©20221124...
Need help?
Do you have a question about the AWM-BT and is the answer not in the manual?
Questions and answers