Advertisement
Quick Links
AWM QR HD VESA Tilt Head
COMPONENT CHECKLIST
A
Heavy Duty
VESA Head
Tilt Head
(x1)
IMPORTANT INFORMATION
! Please ensure this product is installed as per these installation instructions.
! Do not remove/ throw away the black plastic sleeve on the channel clamp, arm links or arm base.
! The manufacturer accepts no responsibility for incorrect installation.
! This product is not suitable for outdoor use or mobile applications.
! Do not over-tighten screws and adjustment points on product.
! This product is compatible with AWM Series monitor arm products: AWM-AHX, AWM-LC, AWM-A46T & AWM-A71T.
! VESA mounted accessories (such as mini PC brackets and mounts), offset VESA locations, and unevenly weighted monitors
(relative to the center of the VESA mounting interface) exert additional leverage that can exceed the capacity of the mount
even though the monitor weight may be within the stated range. Please contact Atdec if you would like further information.
B
C
Screw
(x1)
M4x10mm
(x4)
D
E
Security
4mm
Screw
Hex Key
(x1)
(x1)
Installation Guide
AWM-LTHT
REQUIRED TOOLS
• Phillips Head Screwdriver
WEIGHT RANGE
Flat Monitors
0 - 18kg
(0 - 40lbs)
Curved Monitors
0 - 12kg
(0 - 26.5lbs)
Monitor weight should be within
the weight range of all modular
elements that make up the complete
monitor mounting solution.
AWM-LTHT Page 1 of 3
Advertisement
Related Manuals for Atdec AWM QR HD VESA Tilt Head
Summary of Contents for Atdec AWM QR HD VESA Tilt Head
- Page 1 (relative to the center of the VESA mounting interface) exert additional leverage that can exceed the capacity of the mount even though the monitor weight may be within the stated range. Please contact Atdec if you would like further information.
- Page 2 1. Attach VESA head to monitor 1.1 Slide release switch up 1.2 Check VESA mounting compatibility of monitor. and click into unlocked position, then remove VESA 100mm head from the tilt head. 75mm NOTE: For other sizes, use a suitable adaptor plate (sold separately).
- Page 3 No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd. Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. ©20231013...
Need help?
Do you have a question about the AWM QR HD VESA Tilt Head and is the answer not in the manual?
Questions and answers