Installation On A Simatic S7 Din Rail - Siemens SCALANCE X101-1 Commissioning Manual

Installation and Maintenance
5.1 Installation
5.1.2

Installation on a SIMATIC S7 DIN Rail

Installation on a SIMATIC S7-300 DIN rail
Place the upper guide at the top of the SCALANCE housing in the S7 DIN rail.
1.
2.
Fit the connectors for the power supply.
3.
Fit the connectors for the signaling contact.
4.
Insert the terminal blocks into the sockets on the device.
5.
Figure 5-3
Uninstalling
To remove the media converters of the SCALANCE X-100 series from the SIMATIC S7-300
DIN rail:
1.
2.
5-4
Screw the media converter of the SCALANCE X-100 series to the underside of the DIN
rail.
Installation on a SIMATIC S7-300 DIN rail
First disconnect all connected cables.
Loosen the screws on the underside of the DIN rail and lift the device away from the DIN
rail.
Industrial Ethernet Media Converters SCALANCE X-100 Series
Commissioning Manual, 07/2008, A2B00051521A