Use / Introduction - Fayat Group DYNAPAC DFP5X e Original User Manual

Plate compactor
Table of Contents

Advertisement

USE
DYNAPAC DFP5X e
is used to pack ballast under foundations, on garage
approaches and on pavements, etc. The machine is also
suitable as a complement to larger packing machines, for
example rollers, when packing areas with poor access.
The machine equipped with water tank is designed to pack
small asphalt areas and is particularly suitable for additional
works and repair works. The compact design with an
articulated control handle makes the machine very easy to
manoeuvre.
The machine is also suitable for packing sand and gravel in
thin layers.
You need a genuine battery pack and genuine battery charger
to use the DC power unit installed in the machine.
• Do not use a non-genuine battery pack.
Using a non-genuine battery pack could damage itself and
the DC power unit because of poor protection functions, etc.
INTRODUCTION
Thank you for purchasing a DYNAPAC DFP5X e.
This manual contains information on how to use it; please
carefully read and understand the manual before using the
machine.
The DC power unit, battery pack and battery charger are
provided with manuals from subcontractors. Read and
understand these manuals.
If there are differences in the information between this
manual and the subcontractor manuals, it is the information
in the subcontractor manuals that applies.
If a problem should arise, or if you have any questions about
your product, consult your servicing dealer.
The products pictured in the manuals may not match your
actual product.
This manual and the subcontractor manuals should be
considered permanent parts of the products and should
remain with them if resold.
Ensure that all the manuals are saved and accesible.
We suggest you read the warranty policy to fully understand
its coverage and your responsibilities of ownership.

Advertisement

Table of Contents
loading

Table of Contents