Client - Clinton Electronics Shadow 4-Ch Series User Manual

Table of Contents

Enter/Edit settings for remote access of the DVR using the AVMS Software or CVMS Mobile App.

CLIENT ACCESS:

IP addresses.

BEGIN ADDRESS / END ADDRESS:

is selected above.

SMS PORT/SSL (TCP):

Mobile app use this port for connecting.

WEB PORT/HTTPS (TCP):

REMOTE RESTART:

REMOTE CONFIG:

AVMS Software DVR Info

NETWORK > Network Setup > Client

Select "ALL" to enable access from all IP addresses. Select "RANGE" to limit access to only certain

Enter the desired beginning and ending address for client access when RANGE

Set the SMS and/or the SSL port. (Default SMS port: 7000, SSL port: 7001) AVMS & CVMS

Set the Web port and/or the HTTPS port. (Default web port: 80, default HTTPS port: 443)

Select ON to enable restarting of the DVR from a remote location via AVMS or CVMS Mobile App.

Select ON to enable configuration of the DVR from a remote location via AVMS or CVMS Mobile App.

CVMS Mobile App Info

The IP Address from the

Ethernet tab and the SMS

Port number from the

Client tab are used on

the AVMS software and/

or CVMS Mobile app.

Click 'Secure Connection'

if using the SSL port for

connection instead of the

SMS port.

Table of Contents