Rtsp Server - Clinton Electronics Shadow 4-Ch Series User Manual

Table of Contents

NETWORK > Network Setup > RTSP Server

Enter/Edit settings for remote access of the DVR using the SMS Software, Webviewer or CEC Connect phone App.

RTSP SERVER:

Select "ON" to enable the RTSP stream from the DVR.

TCP [RTSP] PORT:

The default RTSP port number is 554, edit as needed.

HTTP PORT (TCP):

Set the HTTP streaming port number, default 8554.

ONVIF CHANNEL:

Click ON to set the desired DVR channels for ONVIF (Profile S) access. If desired this setting can

be turned OFF. When set to OFF the DVR will not be discoverable when scanning the network for ONVIF devices. The

ONVIF port number is fixed at 8000 (not configurable).

USER:

Edit the user name for RTSP and ONVIF login. Defafult user is remote.

PASSWORD:

Edit the password for RTSP and ONVIF login. Default password is: 1111

• The RTSP address is a Local address (must be on the same network as the DVR). To connect

externally (outside the network) Port Forwarding may need to be setup. Contact Clinton Technical

Support for more information.

• The RTSP address will start at 0 for camera 1. Example:

Camera 1:

rtsp://192.168.xxx.xxx:554/main/ch0

Camera 2:

rtsp://192.168.xxx.xxx:554/main/ch1

Camera 15:

rtsp://192.168.xxx.xxx:554/main/ch14

Camera 16:

rtsp://192.168.xxx.xxx:554/main/ch15

Table of Contents