Monitor - Clinton Electronics Shadow 4-Ch Series User Manual

RESOLUTION:
Select the resolution for the connected MAIN monitor. The DVR will restart after selecting a different
resolution. Selecting a higher resolution than the monitor is capable of can cause no image to be displayed and a
SYNC OUT OF RANGE MESSAGE.
Selecting SWITCH or AUTO from the options will automatically select the best resolution for the monitor.
BORDER COLOR: Change the border color of the camera Multiplex views.
ALPHA BLENDING:
Adjust the transparency of the DVR's On Screen Display Menu.
• If a "SYNC OUT OF RANGE" message is displayed on the monitor, the selected resolution
is too high for the monitor.
• Press 1024768 then ENTER on the remote control to reset the output monitor resolution to
1024x768 resolution.
• Press 123123123 then ENTER on the remote to select the next lowest resolution.
• 4K resolution (3840x2160) will only display on HDMI monitors, it will not display on VGA
monitors.
SYSTEM MENU > Monitor
31