Table of Contents
Advertisement
Use the buttons on the remote to quickly jump to DVR menu options, change camera views and more.
One remote can control up to 20 DVRs.
Two digit remote control code from 00 to 19
Cycle through the various Multiplex Views
Cycle camera/channel of Multiplex View
Use to select a specific camera (1-9) quickly
Use to select a specific camera (10-16) quickly
ex:: Press the 10+ button, then 0 to select
Enters the selected menu item
Left Direction Key / Reverse
Left arrow / Reverse
Down Direction Key / S
Down arrow / Smart Play
Quick reverse search / Open PTZ Menu
Open manual backup menu
Zoom mode when PTZ is connected
Focus mode when PTZ is connected
ID
Two digit remote control code from 00 to 19 (Default code is 00). Hold down ID and press two digits, ex: 01, to change ID to 1. ID code should
match DVR ID (Unit Address). The DVR ID can be found/changed in the General/System menu. A single remote control can be used to control up
to 20 DVRs.
14
REMOTE CONTROL OVERVIEW
ID
Display
Rotate
Number Keys
10+
camera 10.
Enter
Fast Reverse / PTZ
Backup
Zoom (PTZ)
Focus (PTZ)
Pressing 1024768 + ENTER on the number
pad will reset the screen resolution.
LED
Illuminates red when a button is pressed
Record
Manual record
Menu
Access the menu screen
Esc
Backs out of current selection
Lock
Quick User/Admin Logout
Up Direction Key / P
Up arrow / Panorama Play
Right Direction Key / Play
Right arrow / Play
Fast Forward / Play
Fast Forward / Play
Search
Open search menu
Pause
Pause live or recorded footage
Preset (PTZ)
Cycle through PTZ presets when PTZ is
connected
Iris (PTZ)
Iris mode when PTZ is connected
Advertisement
Table of Contents
