Table of Contents
Advertisement
INFORMATION
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
WARNING
- Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate
the equipment.
CAUTION :
To prevent electric shock and risk of fire hazards:
Do NOT use power sources other than that specified.
Do NOT expose this appliance to rain or moisture.
2
WARNING & COMPLIANCE
BEFORE ATTEMPTING TO OPERATE THIS PRODUCT, PLEASE READ THE
USER'S MANUAL CAREFULLY
- This equipment has been tested and found to comply with limits for a Class A digital device, pursuant to part 15
This installation should be made by a qualified service person and
should conform to all local codes.
FCC Compliant (USA)
This device has been tested and found to comply with the limits of Class A computing device pursuant
to part 15 of the FCC rules.
UL Listed
UL Listing means that UL has tested representative samples of the product and determined that it meets
UL's requirements. These requirements are based primarily on UL's published and nationally recognized
Standards for Safety.
CE (Europe)
By affixing the CE marking, the manufacturer assures that the item meets all the essential requirements
of all applicable EU directives.
RoHS
This directive restricts the use of six hazardous materials in the manufacture of various type of electronic
and electrical equipment.
PSE (Japan)
The purpose of the Electrical Appliance and Material Safety Law is to prevent hazards and disturbances
resulting from electrical appliances.
The lightning flash with an arrowhead symbol, within an
equilateral triangle is intended to alert the user to the
presence of uninsulated dangerous voltage within the
product's enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
Advertisement
Table of Contents
