Table of Contents
Advertisement
PTZ/UCC:
Select to control an attached PTZ or EX-SDI 2.0 camera. A PTZ camera must be connected in order to
access this menu item. EX-SDI 2.0 UCC control not available on every model DVR.
After selecting PTZ from the Cameo Menu - The PTZ icon
within PTZ mode. The following will appear on the bottom center of the screen after selecting PTZ from the main
menu.
Using Mouse:
Right clicking the mouse button will bring up the following control screen for Menu, Zoom, Focus, and Iris controls.
Left click on the buttons to adjust your PTZ camera.
ZOOM Control
FOCUS Control
IRIS Control
Using Remote Control:
Press the enter button when the PTZ selection is highlighted on the camera menu.
Menu:
In PTZ mode, press the Menu button to bring up additional PTZ controls such as Preset Setup, Auto Focus, etc.
Pan & Tilt:
In PTZ mode, press the arrow buttons.
Zoom:
In PTZ mode, press the following: Zoom In- Fast Reverse Button Zoom Out- Fast Forward Button
Focus:
In PTZ mode, press the Focus button, then the following: Wide- Fast Reverse Button / Tele- Fast Forward
Button
Iris:
In PTZ mode, press the Iris button, then the following: Open- Fast Reverse Button Close- Fast Forward Button
Refer page 36 for information about setting up PTZ/UCC cameras.
CAMEO MENU > PTZ / UCC Control
will appear in the lower left corner of the screen when
21
Advertisement
Table of Contents
