2 - Insert the cap into the filler neck without screwing it in,
and remove it again to check the oil level on the dipstick
(2).
3 - If the oil level is near or below the lower limit mark (Min.),
fill the oil to the upper limit mark (Max.) (lower edge of
the filler hole).
Clean air filter
7.2
7.2.1 Inspection
1 - Remove the air filter cover and inspect the filter elements.
2 - Clean any dirty filter elements and replace the damaged ones.
If an oil bath air filter is present, also check the oil level.
7.2.2 Cleaning
Double filtering element type
1 - Remove the air filter cover (2) nut (1), then remove the
cover (2).
2 - Remove the wing nut (3) from the air filter and remove
the filter.
3 - Remove the foam filter (4) from the paper filter (5).
4 - Inspect both filter elements and replace them if dam-
aged.
Always replace the paper element at the scheduled inter-
val
38
7. Maintenance
2
Max
1
3
4
1
D5261140
Min.
D5261150
2
5
D5261200